Valcom Network Station Port - Unmanaged (Discontinued) |
(Model # VIP-810)Discontinued, Without Direct Replacement Note: Picture may not represent the actual product. We are continuously working on improving our website and reserve the right to change specifications, availability, and pricing without prior notice. Network Station Port connects to a FXO port, loop start trunk port or dedicated analog telephone terminal devices and is connected to an IP-based LAN/WAN. Operates with both single line telephones and/or PagePac Station DoorPhone and can be used for handset paging control. Phones within the network can dial each other and intercom calls can be routed to a specific telephone for assistance. Paging handset can access any zone in the system and ALL CALL is provided.
Station Port Features:
- No server required
- Recognition of DTMF tones
- Generation of DTMF tones
- Two digit dial plan
- No dial/auto destination
- Easy windows based setup
- Paging access
- Allows analog headsets to access paging via LAN/WAN
- VoIP remote handset paging system access to networked VIP-800 audio adapters
- Point to point or multi-point communication to other telephones and PagePac station doorphone call in stations
- Ringdown circuit
- Information phones - using ringdown with 2500 set
- Analog device line interface-
- Connects to FXO, Analog telephone set or Loop Start Trunk Port
- Max 3 Ringer Equivalents (3 REN)
- Loop Current: 40 Ma Max
- Control Unit Power Requirements: +0 Valcom Power Units
| |
|